CNC數控加工中心立銑刀和鑲硬質合金刀片的端銑刀主要用于加工凸臺、凹槽和箱口面。青島手板此時應著重注意積屑瘤對加工表面的影響，CNC手板加工對于型腔加工，還應注意拐角處加工過切與讓刀。

 

CNC CNC machining center end mills and inserts with carbide inserts are mainly used for machining lugs, grooves and box faces. At this point, we should pay attention to the impact of the accumulation of chips on the surface of the processing, CNC hand processing for cavity processing, we should also pay attention to the corner processing, cut and let the knife.

 

孔徑較大的深孔(一般直徑大于50mm)宜采用套料刀加工。這種方法切削負荷減輕，從而提高了生產率，減少了材料消耗。

 

Larger hole diameter (general diameter greater than 50mm) should be processed with a knife set. This method reduces the cutting load, thereby increasing productivity and reducing material consumption.

 

所用套料刀，當直徑較小時，多采用整體焊接式，直徑較大時，可采用裝配式或可調式。刀具上應裝置用于導向的耐磨鑲條，其材料可為夾布膠木、硬質合金、滾動軸承等，刀刃設計上亦應考慮分屑和斷屑。它也適合于批量生產。

 

When the diameter of the utility model is small, the integral welding type is adopted; when the diameter is large, the assembly type or the adjustable type can be adopted. The tool should be used to wear strip guiding device, the material can be textolite, hard alloy, rolling bearing, blade design should also consider the chip and chip breaking. It is also suitable for mass production.

 

煙臺手板

 

采用深孔鉆加工深孔較好的解決了深孔加工中刀具引偏、刀具冷卻和斷屑排屑等問題，明顯地提高了加工質量和生產率。

 

Deep hole drilling is a better way to solve such problems as offset of tools, cooling of cutting tools and chip removal in deep hole machining, which obviously improves machining quality and productivity.

 

可加工到10~30 的深孔。深孔加工機床，可采用專用的深孔鉆床，也可對普通車床進行改裝。

 

Deep hole capable of processing to 10~30. Deep hole machining machine tool can use special deep hole drilling machine, also can be converted to ordinary lathe.

 

本文由青島手板友情奉獻.更多有關的知識請點擊:http://www.debangboya.com/我們將用*的技術.*真誠的態度.為您提供*為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

 

In this paper, by the Qingdao board of friendship dedication. More related knowledge please click: http://www.debangboya.com/ we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.