醫療器械外殼加工可以從基本的原理、工藝流程、使用材料開始了解和準備，然后對材料進行沖切、沖裁及熔切、拉彎、輥彎及壓彎、壓延旋壓及脹形等工藝的處理，配以各種加工設備與技術，得到所需的零件。那醫療器械外殼加工需要注意事項有哪些呢？

Medical device shell processing can be understood and prepared from the basic principle, process flow and materials used, and then the materials can be processed by punching, blanking and fusion cutting, stretch bending, roll bending and press bending, rolling spinning and bulging, with various processing equipment and technologies to obtain the required parts. What are the precautions for medical device shell processing?

一、在加工醫療器械外殼保持桌面整潔：

1、 Keep the table clean in the processing medical device shell:

在醫療器械外殼加工工廠工作中的工作人員每日都維持著那樣的習慣性，例如都是會在開展零件加工前半小時，對機械設備開展查驗，保證重大事故，無毀壞。次之完全，維持無死角。

The staff working in the medical device shell processing factory maintain that habit every day, for example, they will check the mechanical equipment half an hour before the part processing to ensure that there is no damage and serious accident. The second is to completely eliminate and maintain no dead space.

二、使用潤滑油提高加工醫療器械外殼的精度：

2、 Use lubricating oil to improve the precision of processing medical device casing:

潤滑液是加工制造業開展工作的情況下必不可少的專用工具，應用潤滑脂可以確保設備長期性開展高的效率運行，因此在完成醫療器械外殼加工生產制造之前要保證潤滑脂的充裕，隨后將機床主軸打開，開展加熱。防止設備造成更多的偏差。

Lubricant is an indispensable special tool for the processing and manufacturing industry to carry out work. The application of grease can ensure the long-term efficient operation of the equipment. Therefore, before completing the processing and manufacturing of medical device shells, it is necessary to ensure that the grease is sufficient, and then open the main shaft of the machine tool for heating. Prevent the equipment from causing more deviation.

三、加工醫療器械外殼需選好刀型與材料：

3、 The knife type and material shall be selected for processing medical device shell:

醫療器械外殼加工針對醫療零件的需求也十分高。醫療零件的挑選一定要配對零件的加工型號規格、規格，牽涉到毛胚零件得話，要事先開展打磨拋光解決。雖然這種工作中看上去較為繁雜，可是微小獨到之處都能很有可能引起事故。

Medical device shell processing also has a high demand for medical parts. The selection of medical parts must be matched with the processing model, specification and specification of the parts. If the rough parts are involved, they should be polished in advance. Although this kind of work seems to be complicated, it is very likely to cause safety accidents if it is small and unique.

四、嚴控醫療器械外殼加工檢質量：

4、 Strictly control the quality of medical device shell processing inspection:

廠家要確保醫療器械外殼加工的質量，除了在生產制程中嚴格要求外，就是需要獨立于生產的品質檢驗。一方面需要嚴格按照產品的圖紙嚴格把關尺寸，另一方面還要嚴格控制醫療器械外殼的外觀質量。

In addition to strict requirements in the production process, manufacturers need to ensure the quality of medical device shell processing, which is independent of production quality inspection. On the one hand, it is necessary to strictly control the size according to the product drawings, on the other hand, it is also necessary to strictly control the appearance quality of the medical device shell.

五、嚴格把控醫療零配件加工外殼售后服務：

5、 Strictly control the after-sales service of medical parts processing shells:

如果在產品檢驗過程中發現有尺寸不符的情況，就要及時進行返修或報廢處理；若是醫療器械外殼的外觀存在碰劃傷的話，也要重新處理。

If any size discrepancy is found during product inspection, it shall be repaired or scrapped in a timely manner; If the appearance of the medical device shell is scratched, it should also be handled again.

除此之外，噴涂后的色差、耐蝕性、附著力等檢驗工作也是醫療器械外殼加工過程中的環節之一。更多相關內容就來我們網站http://www.debangboya.com進行咨詢了解吧！

In addition, the inspection of color difference, corrosion resistance and adhesion after spraying is also one of the links in the process of medical device shell processing. More relevant content will come to our website http://www.debangboya.com Consult and understand!