利用山東快速成型制造技術制作出的樣件能夠使用戶非常直觀地了解尚未投入批量生產的產品外觀及其性能并能及時作出評價，使廠方能夠根據用戶的需求及時改進產品，為產品的銷售創造有利條件并避免由于盲目生產可能造成的損失。

The samples made with Shandong rapid prototyping manufacturing technology can enable users to intuitively understand the appearance and performance of products that have not been put into mass production and make timely evaluation, so that the manufacturer can timely improve the products according to the needs of users, create favorable conditions for product sales and avoid possible losses due to blind production.

同時，投標方在工程投標中采用樣品，可以直觀、多個方面地提供評價依據，使設計更加完善，為中標創造有利條件。

At the same time, the bidder can provide evaluation basis intuitively and in many aspects by using samples in the project bidding, so as to improve the design and create favorable conditions for winning the bid.

在產品開發與設計過程中，由于設計手段和其他方面的限制，每一項設計都可能存在著一些人為的設計缺陷。如果未能及早發現，就會影響后續工作，造成不必要的損失，甚會導致整個設計的失敗。

In the process of product development and design, due to the limitations of design means and other aspects, each design may have some artificial design defects. If it is not found early, it will affect the follow-up work, cause unnecessary losses, and even lead to the failure of the entire design.

使用快速成型制造技術可以將這種人為的影響減少到低限度。快速成型制造技術由于成型時間短、精度高，可以在設計的同時制造高精度的模型，使設計者能夠在設計階段對產品的整體或局部進行裝配和綜合評價，從而發現設計上的缺陷與不合理因素，改進設計。

The use of rapid prototyping manufacturing technology can reduce this man-made impact to a low limit. Rapid prototyping manufacturing technology, due to its short molding time and high precision, can manufacture high-precision models at the same time of design, so that designers can assemble and comprehensively evaluate the whole or part of the product at the design stage, so as to find defects and unreasonable factors in the design and improve the design.

此外快速原型除了可以進行設計驗證和裝配校核外，還可以直接用于性能和功能參數試驗與相應的研究，如機構運動分析、流動分析、應力分析、流體和空氣動力學分析等。

In addition to design verification and assembly verification, rapid prototyping can also be directly used for performance and functional parameter tests and corresponding research, such as mechanism motion analysis, flow analysis, stress analysis, fluid and aerodynamics analysis, etc.

采用快速成型制造技術可嚴格地按照設計將模型迅速地制造出來進行實驗測試，對各種復雜的空間曲面更體現快速成型制造技術的優點。如風扇、風轂等設計的功能檢測和性能參數確定，可獲得佳扇葉曲面、低噪音的結構。如果用傳統的方法制造原型，這種測試與比較幾乎是不可能的。

The rapid prototyping manufacturing technology can be used to rapidly manufacture the model in strict accordance with the design for experimental testing, and the advantages of rapid prototyping manufacturing technology can be embodied for various complex spatial surfaces. For example, the function inspection and performance parameter determination of fan, hub and other designs can obtain a good fan blade surface and low noise structure. If we use traditional methods to make prototypes, this kind of testing and comparison is almost impossible.

因此，快速成型制造技術的應用可把產品的設計缺陷消失在設計階段，提高產品整體的設計質量。關于快速成型技術的相關內容您可以來我們網站http://www.debangboya.com進行留言咨詢了解！

Therefore, the application of rapid prototyping manufacturing technology can eliminate the design defects of products in the design stage, and improve the overall design quality of products. You can visit our website for relevant contents of rapid prototyping technology http://www.debangboya.com Leave a message for consultation!